Cart

CENTECH VIETNAM JSC

Address: No. 91-93, Lane 5, An Phu Ward, District 2, HCM City
Telephone: (+84) 24 6663 2426
Hotline: (+84) 961 739 336
Email: centech@centechvn.com
Operation Time: all weekdays (except Sunday and National Holidays)

Endress+Hauser Proline Promass 80E Coriolis flowmeter

The flowmeter for minimized cost of ownership with a compact or remote transmitter.

Free shipping
Credit Card

Overview

Promass E has a long standing reputation as a cost efficient solution for Coriolis applications. Combined with the proven Promass 80 transmitter with push buttons, Promass 80E offers highly accurate measurement of liquids and gases for a wide range of standard applications.

Benefits

  • Cost-effective – multi-purpose device; an alternative to conventional volumetric flowmeters

  • Fewer process measuring points – multivariable measurement (flow, density, temperature)

  • Space-saving installation – no in/outlet run needs

  • Cost-effective – dedicated design for standard applications

  • Safe operation – display provides easy readable process information

  • Fully industry compliant – IEC/EN/NAMUR

Application

  • Measuring principle operates independently of physical fluid properties such as viscosity or density

  • Highly accurate measurement of liquids and gases for a wide range of standard applications.

Device properties

  • Compact dual-tube system

  • Medium temperature up to +140 °C (+284 °F)

  • Process pressure: up to 100 bar (1450 psi)

  • 2-line backlit display with push buttons

  • Device in compact or remote version

  • HART, PROFIBUS PA

Specification

Measuring PrincipleCoriolis
Product headlineThe flowmeter for minimized cost of ownership with a compact or remote transmitter. Highly accurate measurement of liquids and gases for a wide range of standard applications.
Sensor featuresCost‐effective – multi‐purpose device; an alternative to conventional volumetric flowmeters. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space‐saving installation – no in/outlet run needs. Compact dual‐tube system. Medium temperature up to +140 °C (+284 °F).
Transmitter featuresCost‐effective – dedicated design for standard applications. Safe operation – display provides easy readable process information. Fully industry compliant – IEC/EN/NAMUR. 2‐line backlit display with push buttons. Device in compact or remote version.
Nominal diameter rangeDN 8 to 80 (⅜ to 3")
Wetted materialsMeasuring tube: 1.4539 (904L)
Connection: 1.4404 (316/316L)
Measured variablesMass flow, density, temperature, volume flow, corrected volume flow, reference density
Max. measured errorMass flow (liquid): ±0.20 % (standard) 
Volume flow (liquid): ±0.20 % 
Mass flow (gas): ±0.75 % 
Density (liquid): ±0.0005 g/cm³
Measuring range0 to 180 000 kg/h (0 to 6600 lb/min)
Max. process pressurePN 100, Class 600, 63K
Medium temperature range–40 to +140 °C (–40 to +284 °F)
Ambient temperature rangeStandard: –20 to +60 °C (–4 to +140 °F)
Option: –40 to +60 °C (–40 to +140 °F)
Sensor housing material1.4301 (304), corrosion resistant
Transmitter housing materialPowder‐coated die‐cast aluminium
1.4301 (304), sheet
CF3M (316L), cast
Degree of protectionIP67, type 4X enclosure. Remote transmitter: IP67, type 4X enclosure
Display/Operation2‐line backlit display with push buttons
Configuration via local display and operating tools possible
Outputs3 outputs:
0‐20 mA (active)/4‐20 mA (active/passive)
Pulse/frequency/switch output (passive)
InputsStatus input
Digital communicationHART
PROFIBUS PA
Power supplyDC 16 to 62 V
AC 85 to 260 V (45 to 65 Hz)
AC 20 to 55 V (45 to 65 Hz)
Hazardous area approvalsATEX, IECEx, FM, CSA, NEPSI, TIIS
Other approvals and certificates3.1 material, calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR, SIL, marine
PED, CRN
3-A
Product safetyCE, C-tick, EAC marking
Functional safetyFunctional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
Metrological approvals and certificatesCalibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR
Marine approvals and certificatesMarine approval
Pressure approvals and certificatesPED, CRN
Material certificates3.1 material
Hygienic approvals and certificates3-A