Cart

CENTECH VIETNAM JSC

Address: No. 91-93, Lane 5, An Phu Ward, District 2, HCM City
Telephone: (+84) 24 6663 2426
Hotline: (+84) 961 739 336
Email: centech@centechvn.com
Operation Time: all weekdays (except Sunday and National Holidays)

Endress+Hauser Proline Prosonic Flow 92F Ultrasonic flowmeter

Highly accurate, loop-powered flowmeter with innovative parallel path design for minimum inlet runs.

Free shipping
Credit Card

Overview

The Prosonic 92F combines a loop-powered transmitter with an inline sensor in a rugged industrial design. It offers easy system integration and accuracy at an attractive price. Prosonic 92F is ideally suited for the chemical and petrochemical industries.

Benefits

  • Safe design for process industries – international hazardous area approvals

  • No additional pressure loss – full bore design

  • Process transparency – diagnostic capability

  • Easy installation and reduced installation costs – loop-powered transmitter

  • Fully industry compliant – IEC/ATEX/FM/CSA/TIIS/ NEPSI

  • Automatic recovery of data for servicing

Application

  • The measuring principle is independent of pressure, density, temperature, conductivity and viscosity

  • Inline device for homogeneous conductive and non-conductive liquids in the chemical and petrochemical industry.

Device properties:

  • Full compliance according to NACE MR0175 and MR0103

  • Nominal diameter: DN 25 to 300 (1 to 12")

  • Medium temperature: –40 to 200 °C (–40 to 392 °F)

  • Device in compact or remote version

  • 2-line backlit display with push buttons

  • HART, PROFIBUS PA, FOUNDATION Fieldbus

Specification

Measuring PrincipleUltrasonic flow
Product headlineThe higly accurate, loop-powered flowmeter with innovative parallel path design for minimum inlet runs. Inline device for homogeneous conductive and non-conductive liquids in the chemical and petrochemical industry.
Sensor featuresSafe design for process industries – international hazardous area approvals. No additional pressure loss – full bore design. Process transparency – diagnostic capability. Full compliance according to NACE MR0175 and MR0103. Nominal diameter: DN 25 to 300 (1 to 12").
Transmitter featuresEasy installation and reduced installation costs – loop-powered transmitter. Fully industry compliant – IEC/ATEX/FM/CSA/TIIS/ NEPSI. Automatic recovery of data for servicing. Device in compact or remote version. 2-line backlit display with push buttons.
Nominal diameter range2 path version: DN80 to 300 (3 to12") 
3 path version: DN25 to 50 (1 to 2") 
4 path version: DN 80 to 300 (3 to 12")
Wetted materialsSensor: 
A351-CF3M (DN25 to 100) 
1.4404/TP316/TP316L or A106 GrB (DN150 to 300) 
Transducer: 1.4404/316/316L 
Flanges : 1.4404/316/316L or A105/1.0432
Measured variablesVolume flow, calculated mass flow, sound velocity, flow velocity, signal strength
Max. measured errorVolume flow (standard): 
- ±0.5 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s) 
Volume flow (option): 
- ±0.3 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)
Measuring range0.5 to 10 m/s (1.6 to 33 ft/s)
Max. process pressurePN 40 / ASME Cl. 300 / JIS 20K
Medium temperature range-40 to +150 °C (-40 to +302 °F) 
-40 to +200 °C (-40 to +392 °F) optional
Ambient temperature range-40 to +60 °C (-40 to +140 °F) compact 
-40 to +80 °C (-40 to +176 °F) remote sensor 
-40 to +60 °C (-40 to +140 °F) remote transmitter
Transmitter housing materialAlSi10Mg, coated
Degree of protectionIP67, type 4X enclosure 
IP68 type 6P enclosure (option for remote)
Display/Operation2 lines backlit display with 3 push buttons
Outputs1x 4-20 mA HART 
1x Pulse/frequency/switch output (passive)
InputsN/A
Digital communicationHART, Profibus PA, FOUNDATION Fieldbus
Power supply2 wire loop powered
Hazardous area approvalsATEX,FM, CSA, TIIS
Other approvals and certificates3.1 material (wetted parts), calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), CRN, AD2000 PED, EAC marking
Product safetyEAC marking
Metrological approvals and certificatescalibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Pressure approvals and certificatesCRN, PED, AD2000
Material certificates3.1 material (wetted parts)