Address: No. 91-93, Lane 5, An Phu Ward, District 2, HCM City
Telephone: (+84) 24 6663 2426
Hotline: (+84) 961 739 336
Operation Time: all weekdays (except Sunday and National Holidays)

Graco Fire-Ball 300 Pumps

Vendor: Graco

Air-Powered Pumps and Packages for Oil or Grease. Perfect for high pressure oil or grease dispense and transfer.

Free shipping
Credit Card


Graco pumps are built to last. With so many innovative maintenance-saving features, Graco pumps reduce downtime and save you money. No matter what fluid you’re pumping Graco has a quality solution for your low, medium or high volume application.


  • Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life
  • Few moving parts in the air motor assembly means less downtime and low repair cost
  • Displacement rods have minimal wear due to a proprietary Graco manufacturing process
  • Large air porting design provides efficient use of compressed air supply for continuous pump operation without icing
  • Thick cast aluminum air motor housing offers unmatched durability


5:1 Fire-Ball® 300 Pumps
Maximum fluid working pressure
62 bar, 6.2 MPa
Fluid Pressure Ratio
Air pressure operating range
2.8 to 12 bar, 0.28 to 1.2 MPa
Maximum air consumption
0.096 cubic m/min for first lpm pumped at 0.7 MPa, 7 bar, up to 0.058 additional cubic m/min for each additional lpm with pump operated within recommended range
Pump cycles per gallon (liters)
7.9 per l
Recommended speed for optimum pump life
70 cycles per min
Wetted Parts
steel, aluminum, buna-N, urethane,
Sound pressure level (measured at 1 m from unit)
77.8 dB(A)Sound
Sound power level (tested in accordance with ISO 9614–2)
85.6 dB(A)
Approximate Weight
7.7 kg
Loctite® is a registered trademark of the Loctite Corporation.

15:1 Fire-Ball 300 Pumps
Maximum working pressure
186 bar
Fluid pressure ratio
Air operating range
3 to 12 bar
Air motor effective diameter
76 mm
76 mm
Air consumption
0.476 sq m/l at 7 bar. Up to 0.84 sq m/min with pump operated at 12 bar and 66 cycles/min
Pump cycles
24 cycles/l
3 l/min
Maximum recommended continuous pump speed
66 cycles/min, 32 l/min
Recommended speed for optimum pump life
15 to 25 cycles/min
Wetted parts
Carbon Steel, Brass, Copper, Aluminum, PTFE, Nitrile Rubber, Leather
10 kg

Data Sheet


LubricationOil TransferGrease TransferPumpingFluid Transfer


OilMotor OilGear OilFluid GreaseHydraulic Fluid

Grease NLGI #000Grease NLGI #00Grease NLGI #0Grease NLGI #1Grease NLGI #2